Moving sale!!!..
Moderator: Officers
Moving sale!!!..
Gotta lighten up the brew gear load
1 keggle with weldless fitting---$60
1 keggle mashtun with 2 weldless fittings and a mash screen--$75
1 large copper immersion chiller for keggle---- $35
1 almost new 7 gallon brewpot with lid---- $40
1 smaller immersion chiller----$25
1 small banjo burner $25
I would love for these to go to people would actually use them to create beer as opposed to just sitting in my garage gathering dust.....cheers Angelo
1 keggle with weldless fitting---$60
1 keggle mashtun with 2 weldless fittings and a mash screen--$75
1 large copper immersion chiller for keggle---- $35
1 almost new 7 gallon brewpot with lid---- $40
1 smaller immersion chiller----$25
1 small banjo burner $25
I would love for these to go to people would actually use them to create beer as opposed to just sitting in my garage gathering dust.....cheers Angelo
Angelo Ruiz
Re: Moving sale!!!..
I might be interested in that banjo burner. How small is "small"? Care to send me a photo?
M.
M.
Re: Moving sale!!!..
It would be good for 6 or 7 gallon batches .....not enough juice for much bigger boils. I'll see if I can get a better pic than the one that's on the Facebook group
Angelo Ruiz
- fergmeister
- Brewmaster
- Posts: 606
- Joined: Wed Feb 15, 2006 7:33 pm
- Location: Lawrence, KS
Re: Moving sale!!!..
How big is the lg chiller? feet and diameter
Opportunity favors the prepared mind
Re: Moving sale!!!..
I'll snag that burner, mister.
M.
M.
- twedelc
- Homebrewer
- Posts: 175
- Joined: Tue Jul 11, 2006 12:17 pm
- Location: twedelc@gmail.com
- Contact:
Re: Moving sale!!!..
I would pay you for the 7 gallon pot and small immersion chiller (buddy starting up brewing)
Brown shirt could find use for the large chiller and the mash tun.
Chuck, looking at the picture on FB, I calculate (pi*d*#coils) that it is 50' of 1/2"...
Clint
Brown shirt could find use for the large chiller and the mash tun.
Chuck, looking at the picture on FB, I calculate (pi*d*#coils) that it is 50' of 1/2"...
Clint
_________________________________/
My Beer Page
My Beer Page
- fergmeister
- Brewmaster
- Posts: 606
- Joined: Wed Feb 15, 2006 7:33 pm
- Location: Lawrence, KS
Re: Moving sale!!!..
I think it was 50ft but I really don't know for sure....got it at homedepot ..it is 1/2 inch o.d. It does have one kink toward one end in it but water still flows great
Angelo Ruiz
- twedelc
- Homebrewer
- Posts: 175
- Joined: Tue Jul 11, 2006 12:17 pm
- Location: twedelc@gmail.com
- Contact:
Re: Moving sale!!!..
I will not be, some silly little something day.
can arrange for alternate transfer time/place...
Clint
can arrange for alternate transfer time/place...
Clint
_________________________________/
My Beer Page
My Beer Page
- fergmeister
- Brewmaster
- Posts: 606
- Joined: Wed Feb 15, 2006 7:33 pm
- Location: Lawrence, KS
-
- Homebrewer
- Posts: 166
- Joined: Sat Oct 13, 2012 6:50 pm
- Location: Shawnee, KS
Re: Moving sale!!!..
I am very interested in both keggles, not in the budget for February though. If nobody else shows interest, I could swing it in March. Matt
Next Brew: IIPA 3.6, SIPA 1.7, Choc Stout 3.4 - Sep 9
Fermenting: Barley Wine 1.2
Conditioning: 1Red Rye Ale, Berliner Weisse 1.1, SIPA 1.6
On Tap: IPA 2.8, Matilda Clone 1.1, Choc Stout 3.3, Soda Water
Cheers, Matt Parker
Fermenting: Barley Wine 1.2
Conditioning: 1Red Rye Ale, Berliner Weisse 1.1, SIPA 1.6
On Tap: IPA 2.8, Matilda Clone 1.1, Choc Stout 3.3, Soda Water
Cheers, Matt Parker
Re: Moving sale!!!..
Sweet .. everything is sold...I'll repost if anyone backs out on anything
Angelo Ruiz