Lawrence Brewers Guild

Wouldn't it be nice to have an area for misc. bulk part numbers?

High temp oversize o-ring for garden hose disconnect:
McMaster Carr Part 9396K28 Dash # 115 Silicone Shore A: 70 Rated to +450F
1884T22 Buna-N Shore A:70 Rated to +300F

Looking for part numbers for:

Cornie keg lid o-ring

Cornie keg dip tube o-ring

Cornie keg disconnect o-ring

Looking for bulk item numbers from McMaster Carr, Fox Supply, etc.

Or - if someone has ample supply they would like to sell, I'm especially looking for the Cornie disconnect and dip tube o-rings.

Or - if someone is interested in splitting a McMaster Carr order, they usually come in packs of 50.

KEG O-RINGS

Here are the McMaster Carr part numbers for the o-rings that fit the ball-lock kegs:

http://www.mcmaster.com/

Dip Tube O-Rings
5/16" ID x 1/2"OD x 3/32" width
9452K172 BunaN #109

Post O-Rings
7/16" ID x 5/8" OD x 3/32" width
9452K23 BunaN #111

Lid O-Rings
3 1/2" ID x 4" OD x 1/4" width
9452K218 BunaN #417
Pkg 10/$12.50

O-ring sizes by Dash Number:
http://www.klickcue.com/air_rifle/b50_5 ... r_carr.pdf

Rob Martin wrote:Or - if someone has ample supply they would like to sell, I'm especially looking for the Cornie disconnect and dip tube o-rings.

Or - if someone is interested in splitting a McMaster Carr order, they usually come in packs of 50.

I'd split with you on most all of the above if you're ordering. Let me know the price and plan.

Thanks Chris. The dash #'s helped a lot.

For beverage line, a 3/16" FDA tubing, the part # I come up with is:5233K55

For a braid-reinforced gas line, I'm showing McMaster Carr 5238K738

This is 1/4" line.

Looking for Dash number for o-rings for pin locks. Particularly the dip tubes. Are they the same for ball locks?

Rob Martin wrote:Looking for Dash number for o-rings for pin locks. Particularly the dip tubes. Are they the same for ball locks?

Anybody know if the dip tube o-rings are the same size for pin locks and ball locks?