Lawrence Brewers Guild

Sanke Kegs- $20 for uncut or $30 for a cut out top. Makes good Kettles. 2 left.

5" chrome plated beer shank with old faucet, mounting nuts, barbed elbow and nut. This is the good screw on elbow not the welded version- $15

22ft 3/8" CFC with fittings and thermo on the output- $35 *Sold*

Two Ball lock kegs- $25 each- clean, holds pressure. *Sold*

Norgren primary regulator without gauges. Gauges can be had cheap. The diaphragms is good and works just fine. $15 *Sold*

PM me with any more details.

Thanks,
Andy

Hi Andy,
I would take one of the Sankey taps and one of the regulators.
thanks,
Joe

I'll take the pin lock kegs.

Bruce

Pinlock if you have one

Yossarian wrote:Pinlock if you have one

I will have one for you. Thanks.

BruceM wrote:I'll take the pin lock kegs.

Bruce

How many are you interested in?

I'll take the regulator with the gauges if you still have it.

JayHawkeBrewer wrote:I'll take the regulator with the gauges if you still have it.

Joe decided on the one with gauges. So the Norgen without gauges is the one I have left. I tested it out and it works fine. You could get a low pressure gauge for around $5 and rebuild kits are available if it ever needs serviced.

Let me know if you are interested in the Norgen.

Thanks.